The SmallRig Field Monitor Mount Holder review is relevant if you need a compact way to position a 5- or 7-inch monitor on a camera cage or handle.
Its cold shoe base, adjustable tilt and swivel, and locating features are aimed at keeping a small monitor aligned within a camera rig.
SmallRig 2905B Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig 2905B Field Monitor Mount Holder
A compact adjustable mount for filmmakers who want to position a 5- or 7-inch monitor on a camera cage or handle.
- Designed for 5- and 7-inch camera monitors, with a top 1/4-inch screw.
- Cold shoe adapter at the bottom for attaching to a camera cage or handle.
- A lower 1/4-inch-20 threaded hole supports connection to a magic arm or stabilizer.
- Tilt adjusts through 180 degrees and swivel through 360 degrees.
Pros
- Combines a direct cold shoe mount with a lower threaded connection for added rig options.
- Wide tilt and swivel ranges make it possible to reposition a monitor without changing the cage or handle.
Consider before buying
- Swivel tension adjustment requires the included Allen wrench, so fine-tuning it is less immediate than adjusting tilt.
- The maximum supported load changes with tilt angle; check the relevant limit for the monitor’s weight and intended position.
Read the full review summary
The 2905B combines a cold shoe connection with a top 1/4-inch screw, plus a threaded hole underneath for attaching a magic arm or stabilizer.
It can tilt through 180 degrees and swivel through 360 degrees, giving a compact rig some useful positioning range without adding a longer articulated arm.
The mount is a good fit for a cage or handle with a compatible shoe, especially when you use a supported 5- or 7-inch monitor and want to change its viewing angle.
Its tilt tension adjusts with a thumbscrew, while swivel tension uses the included Allen wrench. The stated load capacity varies with tilt angle, so buyers should check the limits against their monitor and planned orientation.
The buying factors
SmallRig 2905B Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Monitor size fit
Designed to support 5- and 7-inch camera monitors, matching common compact field-monitor setups.
Angle adjustment
Offers 180-degree tilt and 360-degree swivel, with separate tension adjustment for the tilt and swivel.
Mounting flexibility
The cold shoe base, top 1/4-inch screw, and lower 1/4-inch-20 threaded hole allow several rig connection approaches.
Anti-twist support
Locating pins and a silicone pad are intended to help secure compatible monitors and protect their contact surface.
Load guidance
Provides angle-specific maximum capacities, but buyers need to match their monitor weight and angle to the relevant limit.
Rig footprint
Its folded dimensions are 78 by 67 by 42 millimeters, keeping the mount relatively compact on a camera setup.
Key Features and Specifications of SmallRig 2905B Mount
- Designed for 5- and 7-inch camera monitors, with a top 1/4-inch screw.
- Cold shoe adapter at the bottom for attaching to a camera cage or handle.
- A lower 1/4-inch-20 threaded hole supports connection to a magic arm or stabilizer.
- Tilt adjusts through 180 degrees and swivel through 360 degrees.
- Tilt tension is adjusted with a thumbscrew; the included Allen wrench adjusts swivel tension.
- Locating pins and a silicone pad help secure compatible monitors, including the Ninja V and V+.
- Maximum load capacity depends on tilt angle: under 9.3 pounds at 90 degrees, under 5.5 pounds at 45 degrees, and under 5 pounds at 30 degrees. The 1/4-inch knurled screw should be retightened with the Allen wrench for added security.
Pros and Cons of SmallRig 2905B Mount
Pros
- Combines a direct cold shoe mount with a lower threaded connection for added rig options.
- Wide tilt and swivel ranges make it possible to reposition a monitor without changing the cage or handle.
- Thumbscrew adjustment makes tilt tension accessible without reaching for a tool.
- Locating pins and a silicone pad address monitor alignment and surface contact.
Consider before buying
- Swivel tension adjustment requires the included Allen wrench, so fine-tuning it is less immediate than adjusting tilt.
- The maximum supported load changes with tilt angle; check the relevant limit for the monitor’s weight and intended position.
- The mount depends on a compatible cold shoe or 1/4-inch-20 connection, so confirm your rig’s mounting point before buying.
Who Should Buy SmallRig 2905B Mount?
Good fit
Consider the 2905B if your camera cage or handle has a cold shoe and you want to attach a 5- or 7-inch monitor with flexible viewing angles.
The locating pins and silicone pad may be particularly useful if your monitor is among the compatible designs named for this mount.
It also suits a compact rig where a direct shoe mount is preferable to a longer arm.
Before choosing, check the monitor’s mounting interface, weight, and the mount’s angle-specific load capacity; use the Allen wrench to retighten the knurled screw as directed.
Who should skip it
Look elsewhere if your setup lacks a compatible cold shoe or 1/4-inch-20 mounting point and you do not plan to add a suitable adapter.
Also compare other mounting approaches if you need to position a monitor well away from the cage or handle, since this mount is designed for direct mounting rather than a long reach.
How the SmallRig 2905B Mount Fits a Camera Rig
Direct mounting and connection options
The cold shoe adapter is intended for a cage or handle, while the lower 1/4-inch-20 threaded hole provides another connection route for a magic arm or stabilizer.
That flexibility can help when a rig changes, but the mount still depends on matching hardware: check both the support’s interface and the monitor’s top screw connection before purchasing.
Adjusting the monitor’s position
A 180-degree tilt range and 360-degree swivel give the monitor broad repositioning options within the mount’s compact form. Tilt tension can be changed by hand with the thumbscrew; swivel tension is adjusted with the included Allen wrench.
If you frequently reconfigure the rig, consider whether you will be comfortable keeping that wrench accessible.
Load capacity varies by angle
The listed maximum is under 9.3 pounds at a 90-degree tilt, under 5.5 pounds at 45 degrees, and under 5 pounds at 30 degrees.
These figures make angle part of the fit decision: compare your monitor’s weight to the limit for the position you intend to use, and retighten the 1/4-inch knurled screw with the Allen wrench as directed.
Monitor contact and alignment
Locating pins are intended to help secure compatible monitors, including the Ninja V and V+, while a silicone pad helps prevent scratching and twisting.
Check that the pins and mounting screw line up with your monitor before relying on those features, especially when using another model.
Alternatives to SmallRig 2905B Mount
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 6313 Camera Monitor Mount
Consider the 6313 if portrait as well as landscape installation is central to your setup. The 2905B may suit buyers whose needs are covered by its stated 5- and 7-inch monitor support and angle-specific load guidance.
- The 6313 also has a cold shoe base, 180-degree tilt, 360-degree pan, and a lower 1/4-inch-20 threaded hole.
- Its description adds a retractable locating screw and support for horizontal and vertical monitor installation.
- The 2905B supports 5- and 7-inch monitors, uses a cold shoe base, and provides 180-degree tilt plus 360-degree swivel.
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig 2066B 9.8-Inch Articulating Magic Arm
Choose the 2066B if you need the reach of an articulating arm and your device fits its stated weight recommendation.
The 2905B is the more direct choice when a cold shoe monitor mount and its angle-specific capacity guidance better match your rig.
- The 2066B is a 9.8-inch articulating arm with 1/4-inch threads at both ends and double 360-degree ball-head adjustment. Its stated maximum weight recommendation is 213 grams.
- The 2905B attaches directly through a cold shoe or lower 1/4-inch-20 threaded hole and offers tilt and swivel adjustment.
Is SmallRig 2905B Mount Worth It?
The SmallRig 2905B Field Monitor Mount Holder is worth considering for a compact rig that needs a directly mounted 5- or 7-inch monitor with flexible tilt and swivel positioning.
Its cold shoe base, secondary threaded hole, and locating features give it practical mounting versatility.
Before buying, confirm the connection points, monitor alignment, and weight limit for your intended angle. The main tradeoff is that swivel tension takes an Allen wrench to adjust, while tilt tension uses a thumbscrew.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig 2905B Field Monitor Mount Holder
A compact adjustable mount for filmmakers who want to position a 5- or 7-inch monitor on a camera cage or handle.
- Designed for 5- and 7-inch camera monitors, with a top 1/4-inch screw.
- Cold shoe adapter at the bottom for attaching to a camera cage or handle.
- A lower 1/4-inch-20 threaded hole supports connection to a magic arm or stabilizer.
- Tilt adjusts through 180 degrees and swivel through 360 degrees.