The SmallRig Cold Shoe Mount review is for camera users who want a simple way to add a microphone, flash, or LED to a compatible cage, handle, or plate.
This two-piece aluminum set uses threaded attachment points and includes the screws and tools for installation.
SmallRig Cold Shoe Review Summary
The quick verdict

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical two-mount set for camera cage users adding a microphone, flash, or LED through threaded accessory points.
- Two cold shoe mounts are included in the set.
- Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
- Aluminum alloy construction.
- Mounting options include 1/4-inch-20 and M2.5 threaded holes, with the package supplying two 1/4-inch-20 screws and four M2.5 screws.
Pros
- The two-piece pack can add accessory positions at separate points in a camera rig.
- Supports common 1/4-inch-20 and M2.5 threaded mounting points.
Consider before buying
- Compatibility depends on the threaded holes and layout of the particular cage, handle, or plate.
- For most SmallRig cages, the supplied 1/4-inch-20 screw is the specified attachment method; the M2.5 holes are unnecessary in that setup, except for Full Cage 1661.
Read the full review summary
The appeal here is straightforward: two compact cold shoe mounts let you create accessory positions on compatible camera rig hardware.
Each mount measures 25 × 25 mm and is made from aluminum alloy, while the package includes 1/4-inch-20 screws, M2.5 screws, and hex spanners for different installation needs.
This set best suits builders who already use cages, handles, plates, or cold shoe blocks with compatible threaded holes.
The bevels at one end are designed to help keep an attached accessory from sliding off, and white arrows indicate mounting direction.
Check your specific cage and accessory layout before buying, especially if you use a DJI or ZHIYUN gimbal, which the mount is not intended for.
The buying factors
SmallRig Cold Shoe Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The mount can attach through 1/4-inch or M2.5 threaded holes, supporting several common rig components.
Accessory usefulness
A cold shoe gives a place to mount a microphone, flash, or LED on compatible camera accessories.
Installation guidance
The included screws, hex spanners, and direction arrows help with setup, though the correct screw depends on the mounting point.
Retention design
Bending bevels at one end are intended to help prevent accidental accessory removal.
Kit value in use
Two mounts and hardware are included, which can help outfit more than one point on a rig.
Rig compatibility clarity
Several compatible threaded mounting types are described, alongside explicit exclusions for DJI and ZHIYUN gimbals and one SmallRig cage exception.
Key Features and Specifications of SmallRig Cold Shoe
- Two cold shoe mounts are included in the set.
- Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
- Aluminum alloy construction.
- Mounting options include 1/4-inch-20 and M2.5 threaded holes, with the package supplying two 1/4-inch-20 screws and four M2.5 screws.
- Two hex spanners are included.
- White arrows show the mounting direction, and bevels at one end are designed to help prevent accidental removal.
- Intended for compatible camera accessories such as cages, cold shoe blocks, handles, and plates; not suitable for DJI or ZHIYUN gimbals.
Pros and Cons of SmallRig Cold Shoe
Pros
- The two-piece pack can add accessory positions at separate points in a camera rig.
- Supports common 1/4-inch-20 and M2.5 threaded mounting points.
- Includes the screws and hex spanners needed for the described mounting options.
- Compact aluminum alloy mounts with direction arrows and retaining bevels.
Consider before buying
- Compatibility depends on the threaded holes and layout of the particular cage, handle, or plate.
- For most SmallRig cages, the supplied 1/4-inch-20 screw is the specified attachment method; the M2.5 holes are unnecessary in that setup, except for Full Cage 1661.
- The mounts are explicitly unsuitable for DJI and ZHIYUN gimbals.
Who Should Buy SmallRig Cold Shoe?
Good fit
Consider this set if your rig has compatible threaded holes and you want dedicated cold shoe positions for a microphone, flash, or LED.
The two included mounts are useful when planning a multi-accessory cage or when you want an extra mounting point available for another compatible setup.
Before ordering, check the thread size and clearance around the intended mounting location.
For a SmallRig cage other than Full Cage 1661, the described installation uses the 1/4-inch-20 screw; if your setup is a different cage or plate, confirm which supplied hardware fits its threaded point.
The arrows and bevels offer helpful orientation and retention details for a small, fixed mounting piece. They do not replace checking that the accessory's shoe and the mounting surface are compatible.
Who should skip it
Skip this mount if you need an option for a DJI or ZHIYUN gimbal, since it is explicitly unsuitable for those systems.
Look elsewhere if your setup needs a joint that tilts or rotates to change an accessory's angle; this design is a fixed shoe mount rather than an articulated positioning arm.
How the SmallRig Cold Shoe Fits a Camera Rig
Threaded attachment and setup
The mount's usefulness depends on having the right threaded point on the rig.
It supports 1/4-inch-20 or M2.5 mounting arrangements and comes with hardware for those options, so a buyer should match the screw to the specific cage, handle, or plate.
SmallRig cage installation has a specific note: use the 1/4-inch-20 screw for cages other than Full Cage 1661, where the M2.5 threaded holes are unnecessary.
Adding a cold shoe position
Once attached to a compatible accessory, the mount creates a shoe location for a microphone, flash, or LED. That makes it useful for rig layouts where the camera body alone does not provide the desired accessory position.
The pack contains two mounts, giving buyers flexibility to add positions to separate parts of a compatible setup.
Retention and orientation
The white arrows indicate how the mount should be oriented, while the bevels at one end are designed to help prevent an accessory from slipping off accidentally. These details make the mounting direction easier to read during setup.
Buyers should still check that the attached device seats correctly and that the shoe connection suits its intended use.
Compatibility boundaries
The described use centers on threaded camera accessories such as cages, handles, plates, and cold shoe blocks.
The product is expressly not suitable for DJI or ZHIYUN gimbals, so owners of those systems should choose a different mounting solution. For other rigs, verify the thread and available clearance before planning the attachment point.
Alternatives to SmallRig Cold Shoe
Camera Flash Shoe Mounts alternative

1,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Adapter 1135
Choose the 2060 set for fixed mounting points and two included mounts.
The Double Ball Head Adapter is a better fit when angle adjustment is central to your setup; its guidance does not recommend monitors or LED lights over 1 kg.
- The Double Ball Head Adapter has a ball head that can rotate through 180 degrees and lock with a side wingnut; it also includes a shoe base and 1/4-inch screw.
- The SmallRig Cold Shoe Mount 2060 is a fixed mount that creates a shoe position on compatible threaded rig hardware.
Camera Flash Shoe Mounts alternative

700+ ratings
Read Amazon ReviewsSmallRig Mini Ball Head Cold Shoe Mount 3577
Choose the 2060 when you want two fixed mounts and the required threaded points are available.
The 3577 better suits a buyer seeking a compact, tilting position for a light or microphone, provided the device stays within its stated support limit.
- The 3577 is a mini ball head with up to 138-degree tilt, a 1/4-inch screw on top, and a cold shoe adapter at the base; its stated device support is up to 250 g.
- The 2060 uses threaded points on compatible rig accessories and provides a fixed cold shoe mount.
Is SmallRig Cold Shoe Worth It?
The SmallRig Cold Shoe Mount 2060 is worth considering for a camera rig that needs one or two fixed accessory positions and has compatible threaded mounting points.
Its two-mount pack, included hardware, and compact aluminum construction make it a practical fit for cage and plate setups.
Check thread compatibility and the mounting instructions for your specific rig before buying, and avoid it for DJI or ZHIYUN gimbals. If you need tilt or rotation to aim an accessory, consider a ball-head style mount instead.
Your review at a glance

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical two-mount set for camera cage users adding a microphone, flash, or LED through threaded accessory points.
- Two cold shoe mounts are included in the set.
- Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
- Aluminum alloy construction.
- Mounting options include 1/4-inch-20 and M2.5 threaded holes, with the package supplying two 1/4-inch-20 screws and four M2.5 screws.